1-800-Simpson


X
Make Your Selections on the Left and See Your Door on the Right
Make Your Selections and See Your Door Below
Image shown is of a standard 6534 design in Douglas fir, 3'0" x 8'0"
This represents the wood species that you selected in an 82 door design.
6534 Shown in Black Caming
Image shown is a Builders Advantage Series 6316 in Sapele Mahogany with 6347 sidelights and 6746 transom.
To see this door on your own project, visit Test Drive a Door.
Elevation Drawing
Cross Section
Wood Species
Glass
Profile
Standard Image
Similar Installed Image
Select Matching Sidelight 6545
Select Matching Sidelight 6170
Want this same design, except with different caming options?
Meridian (6536) Black
Panel | U-Factor | SHGC | VT | Glass Spec* | Glazing Type | Gap Fill |
---|---|---|---|---|---|---|
3/4" FP | 0.42 | 0.25 | 0.27 | Clear | Triple-Glazed IG | AIR |
*Simpson doors can be specified with a variety of glass textures and in the case of insulated units, with different coatings and either air-filled or argon-filled. For test results where there are multiple glass specs shown, the Simpson standard insulated glass unit is noted in bold with glass spec clear. The standard Simpson IG unit with Low-E is noted in bold as Cardinal 272 (or equivalent) with argon gap fill. If your project needs call for a glass type other than the Simpson standard, please provide your specific needs to your Simpson Authorized Dealer.
SHGC=Solar Heat Gain Coefficient
VT=Visible Transmittance
IG=Insulated Glazing
SG=Single Glazing
PLEASE SCROLL
Compare
Copyright © 2025 Simpson Door Company. All rights reserved.