 1-800-Simpson
 1-800-Simpson

 
                
                
                  X
                  
                
              Make Your Selections on the Left and See Your Door on the Right
Make Your Selections and See Your Door Below
 
                    Image shown is of a standard 37122 design in Douglas fir, 3'0" x 6'8"

 
                   
                This represents the wood species that you selected in an 82 door design.
 
                     
                       
                       
             
             
                Image shown includes 37152 exterior French doors.
To see this door on your own project, visit Test Drive a Door.
Elevation Drawing
Detail Drawing
Cross Section
Wood Species
Glass
Profile
Standard Image
Similar Installed Image
 3D Drawings >
 3D Drawings >| Panel | U-Factor | SHGC | VT | Glass Spec* | Glazing Type | Gap Fill | 
|---|---|---|---|---|---|---|
| N/A | 0.46 | 0.34 | 0.37 | Clear | IG | AIR | 
| N/A | 0.37 | 0.19 | 0.32 | Cardinal 272 | IG | Argon | 
| N/A | 0.36 | 0.13 | 0.29 | Cardinal 366 | IG | Argon | 
*Simpson doors can be specified with a variety of glass textures and in the case of insulated units, with different coatings and either air-filled or argon-filled. For test results where there are multiple glass specs shown, the Simpson standard insulated glass unit is noted in bold with glass spec clear. The standard Simpson IG unit with Low-E is noted in bold as Cardinal 272 (or equivalent) with argon gap fill. If your project needs call for a glass type other than the Simpson standard, please provide your specific needs to your Simpson Authorized Dealer.
SHGC=Solar Heat Gain Coefficient
						VT=Visible Transmittance
						IG=Insulated Glazing
						SG=Single Glazing
PLEASE SCROLL
Compare
 
       
       
       
       
      Copyright © 2025 Simpson Door Company. All rights reserved.