Detailed Drawings
The Find a Door tool allows you to personalize this design and get architectural drawings for any custom creation. Visit the 4546 in Find a Door to get the drawings you need.
Cross Section Art
EXTERIOR: SD-0500-001 (Standard)
Photos
Literature
Mastermark Collection
UltraBlock Technology Data Sheet
Door Line Art
Energy Performance Tested Data
Panel | U-Factor | SHGC | VT | Glass Spec* | Glazing Type | Gap Fill |
N/A | 0.41 | 0.02 | 0 | N/A | N/A | N/A |
*Simpson doors can be specified with a variety of glass textures and in the case of insulated units, with different coatings and either air-filled or argon-filled. For test results where there are multiple glass specs shown, the Simpson standard insulated glass unit is noted in bold with glass spec clear. The standard Simpson IG unit with Low-E is noted in bold as Cardinal 272 (or equivalent) with argon gap fill. If your project needs call for a glass type other than the Simpson standard, please provide your specific needs to your Simpson Authorized Dealer.
SHGC=Solar Heat Gain Coefficient
VT=Visible Transmittance
IG=Insulated Glazing
SG=Single Glazing