Detailed Drawings

The Find a Door tool allows you to personalize this design and get architectural drawings for any custom creation. Visit the 6812 in Find a Door to get the drawings you need.

• 6812, 3'0" x 6'8"
• 6812, 3'0" x 6'10"
• 6812, 3'0" x 7'0"

---

Cross Section Art

EXTERIOR: SD-0700-005 (Standard)     SD-0700-004 (Optional)     SD-0800-050 (Optional)

---

Photos

   

---

Literature

Craftsman Collection

UltraBlock Technology Data Sheet

Shaker Sticking Data Sheet

---

Glass & Wood Panel Drawings

• 6812_Clear_smaller_close-up.EPS
• 6812_Clear_smaller_close-up.gif
• 6812_Clear_smaller_close-up.pdf

---

BIM 3D Drawings

• Door-Exterior-Simpson-Craftsman.rfa
• BIM Object Website (External Link)

---

Door Line Art

• 6812.EPS
• 6812.gif
• 6812.pdf

---

Energy Performance Tested Data

Panel	U-Factor	SHGC	VT	Glass Spec*	Glazing Type	Gap Fill
1-7/16” Innerbond DHRP	0.41	0.11	0.1	Clear	IG	AIR
1-7/16” Innerbond DHRP	0.38	0.07	0.09	Cardinal 272	IG	Argon
1-7/16” Innerbond DHRP	0.38	0.05	0.08	Cardinal 366	IG	Argon
3/4" FP	0.46	0.12	0.1	Clear	IG	AIR
3/4" FP	0.43	0.07	0.09	Cardinal 272	IG	Argon
3/4" FP	0.43	0.05	0.08	Cardinal 366	IG	Argon

*Simpson doors can be specified with a variety of glass textures and in the case of insulated units, with different coatings and either air-filled or argon-filled. For test results where there are multiple glass specs shown, the Simpson standard insulated glass unit is noted in bold with glass spec clear. The standard Simpson IG unit with Low-E is noted in bold as Cardinal 272 (or equivalent) with argon gap fill. If your project needs call for a glass type other than the Simpson standard, please provide your specific needs to your Simpson Authorized Dealer.

SHGC=Solar Heat Gain Coefficient
VT=Visible Transmittance
IG=Insulated Glazing
SG=Single Glazing